Rcom Bird brooder $1,000 AUD
Posted by wvass (SYDNEY, NSW) on 24-May-26 04:10 PM AEST
To reply to this advertisement email william.vass@hotmail.com
2. KEY FEATURES
Centralized Heating System: Utilizes a PTC memory element from a carbon-filmed heating system for improved stability and durability.
Automatic Temperature & Humidity Control: Independent systems for precise environmental management.
Built-in Air Filter / Deodorizing Filter: For maintaining air quality within the unit.
Anion Activation Function: Enhances the internal environment.
Water Pump for Humidification: Ensures consistent humidity levels.
Energy Efficiency: Reduces electric power consumption by up to 40 compared to older models.
Recessed Brooding Tray: Designed for easy cleaning and hygiene management.
10-Stage Dimmer for Illumination: Allows control over indoor lighting brightness.
Rotary Door: Facilitates easy access and observation of occupants.
BLDC Fan: Optimizes internal air circulation and minimizes noise (69db).
Large FND Display: Easy-to-read display for temperature and humidity settings.
Alarm Function: Notifies users in case of abnormal temperature conditions.
4.3 Humidity Control
The unit includes an independent humidity system with a water pump. To adjust the target humidity:
1.Ensure the water reservoir is filled and the water pump is correctly installed.
2.Press the HUMIDITY button. The humidity value on the display will blink.
3.Use the UP and DOWN arrow buttons to set the desired humidity.
4.Press OK to confirm the setting. The unit will activate the water pump to reach the target humidity.
5.An alarm function will notify you if there is insufficient water for humidification.
4.4 Illumination Control (LED Lighting)
The internal LED lighting brightness can be adjusted in 10 stages.
1.Press the LIGHT button (or equivalent, refer to control panel diagram if available).
2.Use the UP and DOWN arrow buttons to cycle through the brightness levels.
3.The display may show the current light level (e.g., L1-L10).
5. MAINTENANCE
5.1 Cleaning the Brooding Tray
The recessed brooding tray is designed for easy removal and cleaning to maintain hygiene
1.Gently slide out the brooding tray.
2.Clean the tray with a mild disinfectant solution and rinse thoroughly.
3.Ensure the tray is completely dry before reinserting it into the unit.
5.2 Air Filter / Deodorizing Filter Maintenance
Regularly check and clean or replace the built-in air filter and deodorizing filter to ensure optimal air quality and unit performance.
1.Locate the air filter compartment (refer to unit diagram if available).
2.Remove the filter and clean it according to manufacturer recommendations (e.g., vacuuming, rinsing, or replacement).
3.Reinstall the clean or new filter.
5.3 Water Reservoir and Pump
Periodically clean the water reservoir and water pump to prevent mineral buildup and ensure efficient humidification.
1.Drain any remaining water from the reservoir.
2.Clean the reservoir and pump components with a mild descaling solution if necessary, then rinse thoroughly.
3.Refill with clean, distilled water for best results.